Acer H277H Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro ne Acer H277H. Acer H277HU Quick start guide Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 2
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1 To clean the LCD monitor screen:
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2 Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.
3 Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4 Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any
nature.
5 Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside this
range may result in permanent damage.
6 Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
Package contents
LCD
monitor
Quick
start
guide
AC
Adapter
AC Power
cord
HDMI
cable
(Optional)
DVI / DVI
(Dual Link)
cable
(Optional)
VGA
cable
(Optional)
Audio
cable
(Optional)
DP cable
(Optional)
Adjusting the monitor base
1 Carefully remove the monitor from its packaging.
• The monitor base is attached onto the monitor before shipment and it is undetachable.
2 Pull the monitor base out fully so that the monitor can be placed on a stable surface in the upright position.
3
Secure the monitor base by turning the white screws (at the bottom of the base) using the integrated tab or a suitable coin.
Connecting your monitor to a computer
1 Turn off your computer and unplug your computer’s power cord.
2 Connect the VGA(optional) video cable to the connector.
3 Connect the signal cable to the DVI-D (optional) and/or HDMI (optional)
and/or DP (optional) input socket of the monitor, and the DVI-D (optional)
and/or HDMI (optional) and/or DP (optional) output socket of the graphics
card on the computer.Then tighten the thumbscrews on the signal cable
connector.
4 Connect one end of the adapter to the monitor and the other end to a
properly grounded, AC outlet.
5 Plug the power cords of your computer and your monitor into a nearby
electrical outlet.
6 Connect the audio cable (Optional).
Connect an audio cable to the audio port of the monitor.
Panel controls
No. Item Description
1 Power button/
indicator
Turns the monitor on/off. Blue indicates power
on. Blinking blue indicates standby/power saving
mode.
2
< / > button Press the < / > button to navigate to the desired
function or to change the settings of the current
function.
3 Menu/Enter
button
Press to view the OSD menu. Press it again to
enter a selection in the OSD menu.
4 Auto/Exit button • When the OSD menu is active, press this
button to exit the OSD menu.
• When the OSD menu is inactive, press
this button to activate the Auto Adjustment
function.
5 Empowering
Key
Press this button to open the Acer eColor
Management OSD and access the scenario modes.
DPDVIHDMI DC IN
HDMI
DVI
VGA
DP
AUDIO IN
VGA IN
HDMIHDMI
Note: Audio output is only for audio output model. Please check user
manual for more instruction.
1234
5
Zobrazit stránku 0
1 2

Shrnutí obsahu

Strany 1 - Panel controls

EnglishAcer LCD Monitor Quick Start Guide (QSG)Important safety instructionsPlease read the following instructions carefully.1 To clean the LCD mo

Strany 2

EnglishRegulations and safety noticesFCC noticesThis device has been tested and found to comply with the limits for a Class B digital device pursuant

Komentáře k této Příručce

Žádné komentáře