Acer Power SP Technické informace stáhnout pdf (Strana 60)

54 Chapter 4

IRQ Setting Error

Expansion ROM Allocation Fail

I/O Resource Conflict(s)

Memory Resource Conflict(s)

1. Load default settings in Setup.

2. Enter BIOS Setup and set the Reset Resource

Assignments of the PnP/PCI Options to Yes,

then reboot the system.

3. Remove all adapter cards that are NOT factory-

installed, then reboot the system

PCI Device Error 1. Load default settings in Setup.

2. Enter BIOS Setup and set the Reset Resource

Assignments of the PnP/PCI Options to Yes,

then reboot the system.

3. Remove all adapter cards that are NOT factory-

installed, then reboot the system.

PS/2 Pointing Device Interface Error

PS/2 Pointing Device Error

1. Re-connect PS/2 keyboard and mouse.

2. Enter BIOS Setup and load the default settings.

3. PS/2 mouse

4. PS/2 keyboard

5. System board

DMI Table Was Destroyed 1. Flash BIOS

Press “DEL” key to enter Setup or F1 key to continue 1. Press DEL to enter Setup and reconfigure the system.

Press ESC to turn off NMI, or any key to reboot 1. Press ESC to reject NMI error or press any other key

to reboot the system.

Insert system diskette and press ENTER key to

reboot

1. Insert a bootable disk into the floppy disk drive or

remove this disk if a hard disk is installed.

BIOS Messages Action/FRU

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 71 72

Žádné komentáře

Acer Power SP Technické informace Strana 60