Acer AW2000h-AW170h Uživatelský manuál stáhnout pdf (Strana 55)

4 Install the new fan module.

(1) Insert the new fan module into the chassis.

(2) Connect the fan cable.

5 Observe the post-installation instructions described on page 25.

Replacing the processor and

heatsink

Notes:

• Always connect the power cord last and always remove it before

adding, removing or changing any hardware components. Make

sure that you install the processor into the CPU socket before you

install the CPU heatsink.

• If you buy a CPU separately, make sure that you use an Intel-

certified multidirectional heatsink and fan only.

• Make sure to install the serverboard into the chassis before you

install the CPU heatsinks.

• When receiving a serverboard without a processor pre-installed,

make sure that the plastic CPU socket cap is in place and none of

the socket pins is bent; otherwise, contact your retailer

immediately.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 159 160

Žádné komentáře

Acer AW2000h-AW170h Uživatelský manuál Strana 55