Acer BE320QK Uživatelský manuál stáhnout pdf (Strana 26)

3. Toggle to the left or right to adjust the sliding scales.

4. Input: Select the source from DP In, Mini DP,HDMI2.0 or HDMI(MHL2.1).

5. Auto Source:The default is “On”, can support auto search for signal source in order.

6. DP Format :Default is DP1.2, can selection DP support DP1.1 or DP1.2 format.

7. Wide mode: You can select which screen aspect you are using. The options are Full,

Aspect, and 1:1.

8. PIP/PBP settings

9. Hotkey Assigment: Select the function of shortcut key 1(Modes, Brightness, Volume,

Gamma, Contrast, Blue Light, Over Drive,PIP/PBP) and shortcut keys 2 (Modes,

Brightness, Volume, Gamma, Contrast, Blue Light, Over Drive,PIP/PBP)

10. DDC/CI: Allows the monitor settings to be set through the software on the PC.

-----------------------------------------------------------------------------------------------------------

Note: DDC/CI, short for Display Data Channel/Command Interface, which allows

monitor controls to be sent via software.

11. HDMI Black level setting.

12. Quick start mode: Select Off or On. Turn on to speed up boot speed.

13. LED Control: Controls the brightness of the Key LED.

14. Power-off USB charge: Turn On or Off.

Troubleshooting

Before sending your LCD monitor for servicing, please check the troubleshooting list below

to see if you can self-diagnose the problem.

HDMI/DP Mode (Optional)

Problem LED status Remedy

No picture visible Blue Using the OSD menu, adjust brightness and

contrast to maximum or reset to their default

setting.

Off Check the power switch.

Check if the AC power cord is properly

connected to the monitor.

Amber Check if the video signal cable is properly

connected at the back of monitor.

Check if the computer system is switched on

and in power saving/standby mode.

1 2 ... 21 22 23 24 25 26

Žádné komentáře

Acer BE320QK Uživatelský manuál Strana 26